Serving Guildford, Surrey and Beyond

Cobham Plastering Services

If you need dependable Cobham Plastering Services, Guildford Plastering supports homes and commercial properties across Cobham KT11 and wider Surrey. We handle internal plastering, repairs, floor screeding and basement tanking with careful preparation and professional workmanship.

We provide professional plastering services that cover the work from preparation through to complete cleanup, helping you achieve a durable, clean finish with minimal disruption. Our team can also assess external walls and recommend suitable rendering or insulation solutions where required.

Explore our internal repair services, external rendering options and local coverage before checking answers to common questions about plastering in Cobham.

Internal Plastering And Repair Solutions

We provide internal plastering for homes, commercial premises and renovation projects in Cobham, from isolated repairs to complete wall and ceiling upgrades. Our services include skimming, replastering, dry lining, plasterboard installation, partition walls, ceiling work, coving and decorative finishes.

Skimming For A Paint-Ready Finish

We apply skim plaster to prepared plasterboard, existing plaster and repaired surfaces to create a smooth, even finish ready for decorating. Before skimming, we assess the substrate, remove loose material, control dust and address cracks, damp or movement that could affect adhesion.

Our plasterers use suitable bonding coats and finish plaster according to the surface and room conditions. We pay close attention to joints, corners, reveals and transitions between old and new work, reducing visible lines after painting.

Skimming can refresh tired walls during a property renovation without requiring full removal of the existing plaster. Once the plaster has dried fully, the surface can receive a mist coat followed by the chosen paint system.

Replastering, Patching And Plaster Repairs

We repair damaged plaster caused by impact, plumbing work, electrical installations, settlement or long-term deterioration. Small areas may need patching, while hollow, detached or extensively cracked plaster often requires removal and replastering to provide a stable base.

We match the repair method to the existing wall. This can include bonding plaster, backing coats, finish plaster or compatible materials for older properties. We also feather edges carefully so repaired areas blend with surrounding surfaces rather than forming raised patches.

Where moisture contributes to damage, we identify the likely source before completing the repair. Plaster repairs cannot provide a lasting result if leaks, condensation or rising damp remain untreated.

Dry Lining, Plasterboard Installation And Partition Walls

We install plasterboard to walls and ceilings in new builds, extensions and refurbishment projects. Dry lining can improve installation speed, provide a clean surface for decoration and support insulation or acoustic requirements when we specify the correct board and fixing system.

Our work includes standard, moisture-resistant, fire-resistant and acoustic plasterboard where the room demands it. We cut boards accurately around sockets, windows, doors and service routes, then secure them to suitable framing or masonry.

We also build partition walls for layout changes in homes and commercial plastering projects. We coordinate board installation, joint treatment, access requirements and finishing so the completed partition provides a neat, durable surface ready for painting or further finishes.

Ceiling Plastering, Artex Ceilings And Coving

We carry out ceiling plastering for new ceilings, damaged areas and full-room renovations. Ceiling work requires secure preparation, accurate levelling and controlled application to prevent visible joins, sagging or uneven texture.

We can skim suitable Artex ceilings after checking that the existing coating is sound and properly prepared. If the texture is loose, damaged or unsuitable for covering, we remove or stabilise it before applying the new finish. We do not assume that every textured ceiling can receive plaster directly.

We also install and finish coving to create a clean junction between walls and ceilings. We measure corners carefully, form neat mitres and fill joints before sanding and decorating.

Venetian Plastering And Lime Plastering

We apply Venetian plastering where clients want a polished decorative surface with subtle variation and depth. The finish depends on careful preparation, multiple thin coats, controlled trowel work and suitable protection once the surface reaches the required appearance.

Venetian plaster works best on stable, smooth backgrounds. We discuss the preferred colour, sheen and texture before application because lighting can affect how the finished surface appears.

For period properties, we provide lime plastering where breathability and material compatibility matter. Lime-based systems can suit older masonry better than dense modern materials, particularly when the building needs to manage moisture movement. We assess the existing construction before recommending a lime finish or repair method.

Simply fill out the form and we'll be in touch to arrange a suitable time to call and have a look at the required work.

Once we've taken a look we'll give you a fixed quote.

External Rendering and Insulation

Our external rendering services help protect masonry, improve the appearance of a property and address practical issues such as cracking, damp penetration or heat loss. We assess the existing surface, recommend suitable materials and complete the work with careful preparation and site cleanup.

Choosing Sand And Cement, Silicone Render Or K Rend

We select the render system according to the building’s construction, exposure and required finish. Sand and cement render provides a traditional, robust coating for suitable masonry, while modern polymer-modified systems can offer improved flexibility and weather resistance.

Silicone render and K Rend are coloured render options that can reduce the need for painting after installation. Their breathable, water-repellent finishes suit many homes and commercial buildings, but the substrate must be sound, clean and properly primed before application.

Our external plastering process includes removing loose material, repairing defective areas and preparing reveals, corners and junctions. We explain the available textures and colours before work begins, so the finished exterior rendering matches the property’s design and maintenance requirements.

Lime Render And Exterior Repair Work

Older properties often need a different approach from modern cavity-wall construction. Lime render can suit traditionally built homes because it allows moisture vapour to move through the wall, reducing the risk of trapped damp caused by unsuitable impermeable coatings.

We inspect cracks, blown render, damaged brickwork and failed sealant around windows or service penetrations. We then remove unstable areas, carry out necessary exterior repairs and apply compatible coats at appropriate thicknesses.

A plastering contractor should not cover persistent damp without identifying its cause. We consider defective gutters, leaking pipes, ground levels, exposed masonry and poor previous repairs before recommending external rendering. This approach helps the new finish perform properly and prevents avoidable remedial work.

External Wall Insulation And Durable Finishes

External wall insulation can improve thermal performance by adding an insulation layer beneath a protective render system. We review the wall construction, window positions, roof edges, ventilation and drainage details before advising whether the system suits the property.

The installation normally requires secure boards, reinforced base coats, mesh and a compatible decorative finish. We pay close attention to openings, corners, sills and junctions because weak detailing can allow water entry or create visible cracking.

Our work can include insulation upgrades alongside rendering, external plastering and related repairs. We also provide internal plastering, floor screeding and basement tanking where a wider renovation requires coordinated services. We specify materials based on the building rather than treating every project as identical.

Proudly Serving The Following Communities

Cobham
Chessington
Dorking
Epsom
Liphook
Reigate
Billingshurst
Horsham
Kingston upon Thames
Petworth
Banstead
Windsor

Bramley
Godalming
Send
Woking
Ripley
Milford
Witley
Ash
Cranleigh
Aldershot
Farnborough
Chiddingfold

Frequently Asked Questions

Our Cobham plastering services cover internal plastering, repairs, rendering, floor screeding and basement tanking for residential and commercial properties. We provide clear pricing, careful preparation, reliable workmanship and complete cleanup after the work.

How much does a plasterer typically charge per day in Cobham?

Plasterer day rates in Cobham commonly range from £180 to £300 per person, depending on experience, project complexity and access. Specialist work, such as decorative plastering, external rendering or basement tanking, may cost more.

We usually price smaller projects after assessing the walls, ceilings and required finish. A fixed quotation can provide greater cost certainty than a day rate.

What factors affect the cost of plastering a room?

The main factors include the room’s size, wall and ceiling condition, existing coatings, access, number of coats and chosen finish. Removing old plaster, repairing cracks, installing plasterboard or applying specialist materials can also increase the price.

Decoration, waste removal and additional services such as floor screeding may sit outside a basic plastering quote. We identify these requirements before work begins so the estimate reflects the full scope.

How long does it take to plaster a typical room?

Plastering a standard-sized room often takes one to two days, depending on preparation, drying times and the condition of the surfaces. Extensive repairs, multiple rooms or detailed finishes may extend the schedule.

We allow suitable drying time before decorating. Good ventilation and stable indoor conditions can help the plaster dry evenly.

Can plastering be completed over existing walls or ceilings?

We can plaster over existing surfaces when they are sound, clean and suitable for bonding. Loose plaster, damp areas, flaking paint and unstable backgrounds usually need repair or removal first.

We may use bonding agents, backing coats, mesh or new plasterboard where appropriate. This approach helps create a stable surface and reduces the risk of future cracking or detachment.

What preparation is needed before a plasterer starts work?

We ask customers to remove furniture and wall-mounted items where possible. Floors and remaining fixtures should stay accessible so we can protect them with suitable coverings.

We inspect the surfaces, identify damp or structural concerns and confirm the required finish before starting. Our team manages preparation carefully and completes a thorough cleanup when the work finishes.

Do plasterers repair cracks, damaged ceilings and uneven walls?

Yes, we repair many common surface problems, including cracks, damaged ceilings, blown plaster and uneven walls. The correct method depends on the cause and extent of the damage.

We may apply filler, reinforcement, backing plaster, replacement plasterboard or a complete skim. If we find signs of damp or movement, we explain the issue before carrying out cosmetic repairs.